HR 100 Holter Recorder: Specifications
Length: 3.8 in (96.5 mm) 4.4 in (112 mm)
Width: 2.2 in (56 mm) 3.1 in (78 mm)
Height: 0.7 in (18 mm) 1.4 in (36 mm)
Weight with battery (or batteries)and patient cable: 7 oz. (198 g) 10 oz. (283 g)
Power source: AA (size LR6) Alkaline battery or batteries
Recording period: Minimum 24 hours continuous
Storage capacity: SanDisk® 256 MB Secure Digital (SD) card for 200 sps (HR100, HR300, HR1200)
SanDisk® 1 GB Secure Digital (SD) card for 200, 500, 1000 sps (HR300, HR1200)
Storage period: Data remains valid for >5 years or until SD card is initialized
Battery Life: Minimum 24 hours
Pacemaker Detection: ANSI/AAMI EC38-1998
Effective A/D bit Resolution: 0.5 uV
Dynamic Range: +/-330 mV
Frequency Response: 0.05 Hz to 100 Hz
Sampling Rate: HR100 200 sps, HR300/HR1200 200, 500, 1000 sps
Operating Temperature: 32° F to +113° F (0° to 45° C)
Storage Temperature: -4° F to +149° F (-20° to +65° C)
Operating Humidity: 5 to 95% non-condensing
Storage Humidity: 5 to 95% non-condensing
Operating Altitude: -500 to 15,000 ft. (-150 to 4500 m)
Storage Altitude: -500 to 50,000 ft. (-150 to 15500 m)
Operating Shock: 2.95 in (75 mm) drop to hard surface on any axis
Storage Shock: 31.5 in (0.8 m) drop to hard surface on any axis
Operating Vibration: 0.0002 G2/Hz from 5 to 350 Hz, ramping to 0.0001 G2/Hz from 350 to 500 Hz, random vibration spectrum, 10 minutes in each of three orthogonal axes.
Storage Vibration Packaged recorder and accessories survived standard drop and vibration procedure publishedby the National Safe Transit Association, pre-shipment test procedure, March 1977.
